What are the methods for installing aluminum honeycomb panels

What are the installation methods for aluminum honeycomb panel manufacturers

1. Clean the indoor side pillar frame with cleaning agent. When assembling the aluminum honeycomb panel on site, first fix the aluminum honeycomb panel slightly on the keel, adjust it, and then reinforce it.

2. When installing aluminum honeycomb panels, install them on the wall according to the number of aluminum honeycomb panels. The aluminum honeycomb panel is connected to the keel through the aluminum corners around the keel and fixed to the keel

3. If it is a built-in seamless splicing, holes can be punched in corresponding positions on the keel, and then riveted with flat headed aluminum rivets; For external rubber joints, steel universal screws can be drilled into the keel through aluminum corner code connections.

4. The installation of aluminum honeycomb panels starts from the front, large area, and corners, and follows the installation principle from top to bottom. The connection between the aluminum honeycomb panel and the keel must comply with the drawing requirements, and the bolts must be installed.